4 Tips for Minimizing HVAC Strain in Pelican Bay, FL

Florida gets hot and humid, so HVAC systems get a lot of stress, especially in the summer. Too much strain on your HVAC system can cause it to break down prematurely. Instead, use these four tips for minimizing the strain on your HVAC system in Pelican Bay, FL.

1. Set the Temperature a Little Higher

It can be tempting to set the AC low on hot days, but that creates a large temperature rise (the difference between the outside temperature and your thermostat setting). The greater the temperature rise, the more energy your AC needs to use.

If you normally set your AC at 75 degrees Fahrenheit, try setting the thermostat to 78 degrees instead. The temperature difference will hardly be noticeable, but you will notice the difference on your bill.

2. Find Other Ways to Stay Cool

Your air conditioner should not be your only relief from the heat in the summer. Find additional ways to stay cool, such as:

• Open the windows on nice days
• Drink cold water
• Utilize fans
• Close the shades on sunny days

3. Get Regular Maintenance

Your AC unit accumulates dust and debris inside of it, which can cause it to work harder. Get professional HVAC maintenance and have an HVAC tech clean the unit every year before the weather gets hot.

4. Install a Smart Programmable Thermostat

A smart programmable thermostat allows you to automate your unit to adjust the temperature between when you’re home and when you’re away. Never worry about whether you forgot to change the temperature again! You’ll also be able to control the unit and receive alerts from anywhere using an app on your smartphone.

When you relieve some of the stress on your AC unit, it will last longer and operate more efficiently. When you do run into an issue, contact Nixon Air Conditioning for air conditioner repair services in Pelican Bay, FL.

Image provided by iStock